Rof 1-6G Microwave Optical Fiber Transmission modulator RF over fiber link

Short Description:

1-6G microwave optical fiber transmission module(RF over fiber link) is composed of transmitter module and receiver module, and the working principle as shown below. The transmitter uses a high linear linear direct-mode DFB laser (DML) and integrates automatic power control (APC) and automatic temperature control (ATC) circuit, so that the laser can have efficient and stable output.The receiver integrates a high linear PIN detection and low noise broadband amplifiers. Microwave signal modulates laser to produce intensity modulated optical signal directly to achieve electro-optical conversion, after single-mode fiber transmission, the receiver completes photoelectric conversion, and then the signal is amplified and output by the amplifier.


Product Detail

Rofea Optoelectronics offer Optical and photonics Electro-optic modulators products

Product Tags

Description

p-d-1

This transmission module delivers a wide range of long-distance, high-bandwidth, low-bandwidth RF signals up to 6GHz in a fully transparent mode of operation, providing excellent linear optical communication for a variety of analog broadband microwave applications. Due to the avoidance of using expensive coaxial cable or waveguide, the transmission distance limitation is canceled, which greatly improves the signal quality and reliability of microwave communication. It is widely used in remote wireless, timing and reference signal distribution, telemetry and delay lines communication field.

Product feature

Operating frequency 1-6GHz
DWDM wavelength is available for wavelength ,multiplexed
Excellent RF response flatness
Wide dynamic range
Entire transparent work
Can be customized according to customer requirements

Application

Remote antenna
Long distance analog fiber communication
Tracking, telemetry and control
Delay lines

parameters

performance parameters

RF feature
Parameter Unit Min Typ Max Remarks
Operating frequency GHz 1   6  
Input RF range dBm -60   20  
Input 1dB compression point dBm   20    
In-band flatness dB   3    
Standing wave ratio     1.75    
Gain dB   -10   Optional path loss 6dB
RF emission loss dB -10     <6GHz
Input impedance Ω   50    
Output impedance Ω   50    
RF connector   SMA-F

Limit parameters

Parameter Unit Min Typ Max Remarks
Input RF operating power dBm     20  
Operating voltage V 4.5 5 5.5  
Operating temperature -40   +85  
Storage temperature -40   +85  
Working relative humidity % 5   95

order information

* please contact our seller if you have special requirements.


  • Previous:
  • Next:

  • Rofea Optoelectronics offers a product line of commercial Electro-optic modulators, Phase modulators, Intensity modulator, Photodetectors, Laser light sources, DFB lasers,Optical amplifiers, EDFA, SLD laser, QPSK modulation, Pulse laser, Light detector, Balanced photodetector, Laser driver, Fiber optic amplifier, Optical power meter, Broadband laser, Tunable laser, Optical detector, Laser diode driver, Fiber amplifier. We also provide many particular modulators for customization, such as 1*4 array phase modulators, ultra-low Vpi, and ultra-high extinction ratio modulators, primarily used in universities and institutes.
    Hope our products will be helpful to you and your research.

  • Related Products