Performance coordinate system for photodetector

Performance coordinate system for photodetector
When choosing a photodetector, many people first look at the value of “responsivity” – it represents how many amperes of output current are generated per watt of incident light energy. The higher the value, the more powerful the device seems to be. But the article points out that high responsiveness only indicates that the output current is amplified, and does not mean that the optical detector as a whole is useful. To truly evaluate a device, it is necessary to put it into a multidimensional coordinate system and make a comprehensive judgment.
The first key indicator is quantum efficiency. It measures how much of the incident photons ultimately become collectable charges. Compared to responsivity, quantum efficiency better reflects the physical conversion ability of the material itself and is not affected by the amplification gain of the circuit. If a device relies on external gain to increase its responsivity, but its quantum efficiency is mediocre, then its true capabilities are actually limited.
The second dimension is response speed. Many high gain devices achieve current amplification by allowing charges to stay in the device for a longer period of time, at the cost of slower switching and inability to keep up with changes in high-speed optical signals. So when doing high-speed optical communication, the priority is not responsiveness, but bandwidth and rise time. Speed and high gain are often interdependent.
The third dimension is noise and specific detection rate. Whether a optical detector is good or not ultimately depends on whether it can distinguish weak light signals from background noise. The higher the detection rate, the lower the lower limit of the optical power that the device can detect at the same noise level. In low light detection scenarios, this indicator is much more important than responsivity.
It should also be noted that when comparing data from different photodetector, it is important to verify whether the testing conditions are consistent: testing wavelength, incident light power, photosensitive area, and noise bandwidth, all of which can significantly affect the values. The responsivity of the same device measured under different conditions may vary greatly, and comparing it directly can easily lead to erroneous conclusions.
Photodetectors are not a game with a single indicator. A high responsiveness simply indicates that it has a large value on a certain axis. Its true usefulness lies in its efficiency, speed, noise, and frequency band all matching your actual needs. Next time when selecting components, don’t be led by a high responsiveness number. Put the indicators into the application and the selection process becomes clear: prioritize bandwidth and response speed for high-speed optical communication; Low light detection prioritizes noise and specific detection rate; Mid infrared detection also requires checking the working band, working temperature, and bias voltage conditions. Responsiveness is only a basic reference and cannot be used alone as a criterion for “usability”.


Post time: Nov-19-2026