Rof RF modules 0.5-6G Microwave Optical Fiber Transmission RF over fiber link

Short Description:

The Mini analog wideband transceiver module RF over fiber link (Fiber Optic Transmitter) is a low-cost, high performance analog wideband transceiver with a very wide dynamic range, designed specifically for optical fiber RF applications. A pair of transceivers will create two-way RF to optical and optical to RF conversion and transmission links that can provide high spurious free dynamic range(SFDR), operating at frequencies from 0.5GHz to 6GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses high performance InGaAs photodiode, the transmitter uses linear optical isolation FP/DFB laser, and the optical fiber uses 9/125 μm single-mode fiber with working wavelength of 1.3 or 1.5μm.

Product Detail

Rofea Optoelectronics offer Optical and photonics Electro-optic modulators products

Product Tags

Description

p-d-1
The Mini analog wideband transceiver module RF over fiber Link (Fiber Optic Transmitter) is a low-cost, high performance analog wideband transceiver with a very wide dynamic range, designed specifically for optical fiber RF applications. A pair of transceivers will create two-way RF to optical and optical to RF conversion and transmission links that can provide high spurious free dynamic range(SFDR), operating at frequencies from 0.5GHz to 6GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses high performance InGaAs photodiode, the transmitter uses linear optical isolation FP/DFB laser, and the optical fiber uses 9/125 μm single-mode fiber with working wavelength of 1.3 or 1.5μm.

Product feature

Bandwidth response 50MHz to 6GHz
Tight cast metal case
High SFDR
flat frequency response
1.3 and/or 1.5μm with isolated FP/DFB

Application

WiMAX / 4G LTE
5G communication
Shipborne radio frequency distribution
satellite earth station

parameters

performance parameters

Parameter Symbol Min Typ Max unit
Supply voltage VCC 4.5 5 4.5 Volts
Supply current (total current) ICC   100   mA
Laser output power     2 4 mW
Transmitter operating wavelength     1310/1550   nm
Receiver operating wavelength     1310/1550   nm
High frequency cut-off HFC   6   GHz
Low frequency cutoff LFC   50   MHz
Frequency response(0.6– 6GHz)     ± 1.5 ±2 dB
Input rf power     -5   dBm
input/Output impedance Z   50   Ohms
Standing wave ratio VSWR     1.5   dB
Rf link gain   -5 0   dB
Rf port   SMA
Optical fiber port   Single-mode fiber 900umProtective casing    FC/APC

Limit parameters

Parameter Symbol Min Max unit
Storage temperature TS -40 85
Operating temperature TO ‐25 65
DC Supply voltage VDP 4.5 5.5 V
Maximum RF input(Tx)     10 dBm
Maximum optical input (Rx)     4 mW

order information

ROF- MINI XX XX X X
 

Mini analog broadband optical transceiver module

RF over fiber Link

Operating

wavelength:

13- 1310nm

15- 1550nm

Modulation bandwidth:

01---10~ 1200MHz

02---50-3000MHz

03---50~6GHz

 

Encapsulation:

M---module

Connector

FA- --FC/APC

SP---User specified

* please contact our seller if you have special requirements.


  • Previous:
  • Next:

  • Rofea Optoelectronics offers a product line of commercial Electro-optic modulators, Phase modulators, Intensity modulator, Photodetectors, Laser light sources, DFB lasers,Optical amplifiers, EDFA, SLD laser, QPSK modulation, Pulse laser, Light detector, Balanced photodetector, Laser driver, Fiber optic amplifier, Optical power meter, Broadband laser, Tunable laser, Optical detector, Laser diode driver, Fiber amplifier. We also provide many particular modulators for customization, such as 1*4 array phase modulators, ultra-low Vpi, and ultra-high extinction ratio modulators, primarily used in universities and institutes.
    Hope our products will be helpful to you and your research.

  • Related Products