Rof RF module 0.6-6G Microwave Optical Fiber Transmission Analog Link RF over fiber

Short Description:

The Mini analog wideband transceiver module(Fiber Optic Transmitter) is a low-cost, high- performance analog wideband transceiver with a very wide dynamic range, designed specifically for optical fiber RF applications. A pair of transceivers will create two-way RF to optical and optical to RF conversion and transmission links that can provide high spurious free dynamic range(SFDR), operating at frequencies from 0.6GHz to 6GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses high performance InGaAs photodiode, the transmitter uses linear optical isolation FP/DFB laser, and the optical fiber uses 9/125 μm single-mode fiber with working wavelength of 1.3 or 1.5μm.

Send email to us DOWNLOAD

Product Detail

Rofea Optoelectronics offer Optical and photonics Electro-optic modulators products

Product Tags

Description

This transmission module delivers a wide range of long-distance, high-bandwidth, low-bandwidth RF signals up to 6GHz in a fully transparent mode of operation, providing excellent linear optical communication for a variety of analog broadband microwave applications. Due to the avoidance of using expensive coaxial cable or waveguide, the transmission distance limitation is canceled, which greatly improves the signal quality and reliability of microwave communication. It is widely used in remote wireless, timing and reference signal distribution, telemetry and delay lines communication field.

Product feature

● Bandwidth response 0.6GHz to 6GHz

● Tight cast metal case

● High SFDR

● flat frequency response

● 1.3 and/or 1.5μm with isolated FP/DFB

Application

● WiMAX / 4G LTE

● 5G communication

● Shipborne radio frequency distribution

● satellite earth station

parameters

performance parameters

Parameter	Symbol	Min	Typ	Max	unit
Supply voltage	VCC	4.5	5	4.5	Volts
Supply current (total current)	ICC		100		mA
Laser output power			2	4	mW
Transmitter operating wavelength			1310/1550		nm
Receiver operating wavelength			1310/1550		nm
High frequency cut-off	HFC		6		GHz
Low frequency cutoff	LFC		0.6		GHz
Frequency response(0.6– 6GHz)			± 1.5	±2	dB
Input rf power			-5		dBm
input/Output impedance	Z		50		Ohms
Standing wave ratio VSWR			1.5		dB
Rf link gain		-5	0		dB
Rf port		SMA
Optical fiber port		Single-mode fiber 900umProtective casing FC/APC

Limit parameters

Parameter	Symbol	Min	Max	unit
Storage temperature	TS	-40	85	℃
Operating temperature	TO	_25	65	℃
DC Supply voltage	VDP	4.5	5.5	V
Maximum RF input(Tx)			10	dBm
Maximum optical input (Rx)			4	mW

order information

ROF- MINI

Mini analog broadband optical transceiver

module

Operating

wavelength：

13- 1310nm

15- 1550nm

Modulation bandwidth：

01---10~ 1200MHz

02---10-3000MHz

03---0.6~6GHz

Encapsulation：

M---module

Connector：

FA- --FC/APC

SP---User

specified

* please contact our seller if you have special requirements.

Previous: Rof 3GHz/6GHz Microwave Optical Transceiver Module Analog Link RF Over Fiber

Next: Rof Intensity Modulator thin film lithium niobate modulator 20G TFLN modulator

Rofea Optoelectronics offers a product line of commercial Electro-optic modulators, Phase modulators, Intensity modulator, Photodetectors, Laser light sources, DFB lasers,Optical amplifiers, EDFA, SLD laser, QPSK modulation, Pulse laser, Light detector, Balanced photodetector, Laser driver, Fiber optic amplifier, Optical power meter, Broadband laser, Tunable laser, Optical detector, Laser diode driver, Fiber amplifier. We also provide many particular modulators for customization, such as 1*4 array phase modulators, ultra-low Vpi, and ultra-high extinction ratio modulators, primarily used in universities and institutes.
Hope our products will be helpful to you and your research.

Analog Link RF over fiber